List of 1LEAP Sensor Security Systems Online

1LEAP 1L-PS01 Wired Sensor Security System
1LEAP 1L-PS01 Wired Sensor Security System
Product DescriptionModel No: 1L-PS011LEAP PIR Motion SensorThe Product is new Energy Saving Device, it adopts good sensitivity detector, integrated ckt. It gathers automatism, convenience, Safety,Saving energy physical functions. It works by receiving motion Infrared rays. And automatically ON by presetting a timer it will OFF.Quality control standards:Operating Volt: AC 220-250V 50Hz-60Hz.Load power: Up to 300/1200W MaxAmbient Light: 3-2000 (Adjustable)Load type: Incandescent lamp, LED light, CFL, fans, etcDetecting distance: 0~7MDetecting Angle: 360 Degree.Installation Height: 2.2-4 MtrMotion Detection Speed: 0.6~1m/sPower Consumption : 0.1W (static) 0.4(Work)Working Humidity: less than 93%RHDelay: 10 Seconds -7 Minutes (Adjustable)PRODUCT INSTALLATION:1.Keep Sensor unit 1.6 Mtr higher from the ground level.2. The light, such as incandescent lamp which emits high heat should be kept away from the switch, otherwise it might be turn on/off voluntarily.3. On being fixed to the wire first time, the switch’ initialization will take 1-2 minutes. It’s natural for the switch to turn on/off voluntarily.4. When you install the switch on daytime, the Default State of the switch will make the light off.Keep the detector of the switch from illumination, then the light will turn ON. The darker, the switch will be more sensitive. If it is not very sensitive, turn the yellow port counterclockwise with a long and thin tool to get a proper light sensitivity. 22 ft Detection Range 0 m Max Alarm Distance Drilling
End of Result